Cadac M16 - Manual (Page 42)

APP-4
M16 Microphone Amplifier Revision MA2005-7
CADAC USB ReProgramming Utility
CADAC will, from time to time, release firmware updates for the M16
in order to improve performance and enhance facilities.
Your local CADAC distributor will keep you informed when such up-
dates are available.
The following sections explains how to install the new firmware into
the M16 using the USB ReProgramming Utility.
Before any update can take place, it is important to make sure that
neither SAM Configuration nor Sound Automation Manager is run-
ning on the system. If either of these applications is active, then it
must be closed.
NOTE: Prior to updating the M16 Flash Memory with new
firmware, it is important to make sure that ALL Windows appli-
cations are closed.
When SAM is running, it takes control of the USB port and retains
control even when the application has been closed. It is therefore im-
portant to make sure that control over the USB is released, in order
for the reprogramming application to operate correctly.
Releasing the SamUSB port
On the Windows taskbar, right-click on the SamUSB icon and click
on Exit. This releases the USB Port.