Cadac M16 - Manual (Page 6)

iv
M16 Microphone Amplifier Revision MA2005-7
Features
■ 16 channels of high performance microphone amplifiers.
■ Ideal solution for touring, broadcast or recording applications
when high quality microphone amplifiers are required.Each
channel output is provided with an integral 3-way active splitter.
■ Each output is designed to drive over long cable lengths in
excess of 500m
■ All channels are fitted with a switchable high pass filter.
■ An optical MADI output is provided to allow multi-channel con-
nection to digital consoles or workstations.
■ High build quality with hand tuned Common Mode Rejection and
Balanced circuitry on all I/O.
■ Front Panel control of all parameters, or remote control options.
■ Up to 32 x M16 units can be connected to one control system.
■ Audio interfaces directly with the CADAC D16, 16 x 16 Digital
Mix Matrix via dedicated buss link connectors.
■ Designed to exceed current EMC directives, and immune from
receiving or transmitting radio frequency interference.
Using the M16 Manual
In order to obtain the most out of your M16, please read the User
Manual carefully.
Prior to installing and using the M16, it is also important that you
have read both Safety Instructions and Important Information.
If you still have a problem that cannot be resolved by referring to this
manual, then please contact your local CADAC distributor.
All information provided within this user manual is provided in good
faith. CADAC follows a policy of continual product development;
changes to equipment specification may be made without prior no-
tice.