Cadac M16 - Manual (Page 16)

3-2
M16 Microphone Amplifier Revision MA2005-7
3.2 M16 Rear Panel
1. Mains Inlet, Fuse and Power switch
2. Ground Stud
3. RS-485 Remote Communications Output Connector
4. RS-485 Remote Communications Input Connector
5. Word Clock BNC Connector
6. Word Clock Input/Output Selector Switch
7. Fibre Optic Output Connector (Tx) for MADI Output.
8. Fibre Optic Input Connector (Rx). Not Used.
9. 64/32 56/28 MADI Protocol Switch.
10.96kHz, 48kHz Sample Rate Switch.
11.PFL IN
12.PFL OUT
13.Analogue Microphone Level Input Connectors
14.Analogue Line Level Output Connectors
15.Additional Analogue Outputs on 2 x 37-Way D-sub Connectors
FIG 3-2. M16 rear panel layout
1 2 3 4 5 6 7 8 9 10 14
11 15 12 13