Assembly instructions for qualified persons 5.1 – Caple CM400FA User Manual
Page 12
42
UK
The company supplying this machine cannot
be held liable for any damage arising from
incorrect installation, insufficient or lack of
maintenance, or improper use of the appliance.
• Legal standards and connection instructions
from the local electricity supplier must be
respected.
• Before making electrical connections, make
sure that the electrical capacity of the sys-
tem is suitable for the maximum power of
the appliance, as indicated on the rating
plate.
• When making connections or repairs, it is
necessary to disconnect the appliance from
the mains electricity.
• When the appliance is assembled, it must
not be possible to touch any insulated
cables enabling appliance operation.
• The appliance is equipped to be connected
to a single plug socket, which must be fitted
in full compliance with the standards in
force. Only a qualified electrician may install
a plug socket or replace the power cord,
which must be performed in full respect of
the standards in force.
• If, after connection, it is no longer possible
to reach the plug, a separator with more
than one pole and a contact distance of at
least 3 mm must be fitted in order to comply
with safety regulations.
• The unit housing the built-in coffee machine
5.
ASSEMBLY INSTRUCTIONS FOR QUALIFIED PERSONS
5.1
INSTRUCTIONS FOR
BUILT-IN ASSEMBLY
must be suitably fixed to the floor or wall in
the room.
• To guarantee safe machine use, the unit
housing the machine must be structurally
sound and its guide attachment points must
be able to sustain a weight of three times
that of the coffee machine during the
removal phase.
5.2
CM400FA BUILT-IN UNIT
DIMENSIONS
A 600 mm
A 23,62 Inc
B da 562 a 568 mm
B 22,13 - 22,36 Inc
C 450 mm
C 17,72 Inc
D da 16 a 19 mm
D 063 - 075 Inc
SCM5
SCM5_UK_Rev_2.qxp 23/01/2008 15.58 Pagina 42