Caple CM400FA - Manual (Page 19)

49
UK
• Press the hot water delivery key once:
• The display will read:
• Hot water will come out of the nozzle. When
you have the required amount, press the
hot water dispensing key again to interrupt
hot water delivery.
When hot water is being dispensed, never
allow the nozzle to come into contact with
parts of the body and never place your
hands under the nozzle. Always position the
nozzle so it is inclined downwards, towards
the cup grille.
WARNING
WARNING
RISK OF SCALDING
7.8 DISPENSING HOT
WATER
This provides delivery of hot water for brewing
tea, chamomile-tea or herb teas.
Before starting this operation, make sure
that there is water in the tank (only for ver-
sion with tank).
Place a suitable container beneath the hot
water nozzle.
CAUTION
While steam is being delivered do not touch
the nozzle with any part of the body, never
place hands below the nozzle and have it
always facing downwards towards the cup-
holder grid.
This is used to dispense steam to foam milk or
to heat other liquids.
To foam milk, proceed as follows:
Pour the required amount of milk into a cap-
puccino cup (if fresh milk is used, the foam will
be more compact).
Insert the TURBOCREAM nozzle into the cup
and press the steam button. Once the required
temperature has been reached, press the but-
ton again to switch off the steam.
• Residual condensation will come out of the
steam nozzle; use the nozzle for the
required time as soon as it begins to dis-
pense steam.
• The display will read as follows (example):
IMPORTANT: Each time after dispensing
steam, carefully clean the
steam nozzle with a damp
cloth.
7.9 STEAM DISPENSING
SCM5
SCM5_UK_Rev_2.qxp 23/01/2008 15.59 Pagina 49