Caple CM400FA - Manual (Page 25)

55 SCM5
UK
At the end of the waiting period, the dis-
play visualises the message:
Rinse the tank and refill it again with clean
fresh water (without switching off the
machine).
NOTE: Utilise at least 4 litres of water (1.06 gal-
lons) of solution, otherwise it will be
necessary to restart the cycle.
Wait for approximately five minutes.
At the end of the waiting period, the display
visualises the message:
Pressing the ENTER key, the machine will start
the rinsing cycle, taking 2 litres of water from
the tank and expelling it from the lance.
During this phase, the machine displays:
At the end of using the 2 litres of water taken
from the tank, the machine again displays:
Pressing the ENTER key again, the machine
will start the second phase of the rinsing cycle,
taking 2 litres of water from the tank.
Rinse
Refil Water Tank
At the end of the rinsing phase, the machine
displays the message:
WARNING
WARNING
Leave the machine to heat up for a few min-
utes; at the end of this time, the machine will
return to its ready status.
We advise using the steam dispensing func-
tion for a few minutes at the end of each de-
scaling cycle.
You may notice drops of water and steam
coming from the hot water nozzle during the
heating stage.
SCM5_UK_Rev_2.qxp 23/01/2008 15.59 Pagina 55