Caple CM400FA - Manual (Page 9)

39
UK
Always quote the machine serial number in all
communications to the manufacturer, Sirius.
The machine is transported on a pallet, inside
boxes which are secured to the pallet with ribs.
Prior to carrying out any transport or handling
operation, the operator must:
• put on work gloves and protective footwear,
as well as a set of overalls which must be
elasticated at the wrists and ankles.
The pallet must be transported using a suit-
able means for lifting (e.g., forklift).
CAUTION
RISK OF IMPACT
OR CRASHING
During all handling operations, the operator
must ensure that there are no persons,
objects or property in the handling area.
The pallet must be slowly raised to a height
of 30 cm (11,8 in) and moved to the loading
area. After first ensuring that there are no
persons, objects or property, loading opera-
tions can be carried out.
Upon arrival at the destination and after
ensuring that there are no persons, objects
or property in the unloading area, the prop-
er lifting equipment (e.g. forklift) should be
used to lower the pallet to the ground and
then to move it (at approx. 30 cm (11,8 in)
from ground level), to the storage area.
Before carrying out the following operation,
the load must be checked to ensure that it is
in the correct position and that, when the
supports are cut, it will not fall.
The operator, who must first put on work
gloves and protective footwear, will proceed
to cut the supports and to storing the prod-
uct. To carry out this operation, the techni-
cal characteristics of the product
must be consulted in order to know the
weight of the machine and to store it
accordingly.
CAUTION
RISK OF POLLUTION
3.
TRANSPORT AND HANDLING
3.1 MACHINE
IDENTIFICATION
3.2 TRANSPORT
3.3
HANDLING
CAUTION
RISK OF IMPACT
OR CRASHING
SCM5
CAUTION
INFORMATION TO THE
USERS
Under the senses of art. 13 of
Law Decree 25th July 2005, n.
151 “Implementation of the
Directives/ Guidelines
2002/95/CE, 2002/96/CE and
2003/108/CE, concerning the reduction of
the use of dangerous substances in electric
and electronic equipment, as well as the
disposal of wastes“.
The symbol of the crossed large rubbish con-
tainer that is present on the machine points out
that the product at the end of its life cycle must
be collected separately from the other wastes.
The user for this reason will have to give the
equipment that got to its life cycle to the suita-
ble separate waste collection centres of elec-
tronic and electrotechnical wastes, or to give it
back to the seller or dealer when buying a new
equipment of equivalent type, in terms of one to
one. The suitable separate waste collection for
the following sending of the disused equipment
to recycling, the dealing or handling and com-
patible environment disposal contributes to
avoid possible negative effects on the environ-
ment and on the people's health and helps the
recycling of the materials the machine is com-
posed of. The user's illegal disposal of the pro-
duct implies the application of administrative
fines as stated in Law Decree n.22/1997” (arti-
cle 50 and followings of the Law Decree
n.22/1997).
SCM5_UK_Rev_2.qxp 23/01/2008 15.58 Pagina 39