Code CR3500 - Manual (Page 30)

C004387_07_CR3500_User_Manual - 24 Save Settings
1.9.9 - Configuration for Microsoft Bluetooth Stack Instructions (continued)
2a. Go to http://www.codecorp.com/bdaddr.php and create a QuickConnect code using the address from step
2. Use the CodeXML® Router/ 2-way applications section if CodeXML® Router will be installed, otherwise create a
QuickConnect Code using the section for Serial Applications.
3. Under “COM Ports” tab, select “Add”. In Add COM Port dialog box, select Incoming, click OK. Windows Installs
driver and create a Bluetooth COM Port. Note the COM port number.
4. Install the CodeXML® Router Software to the Device on the Appropriate COM Port. Reboot the PC and then
scan your QuickConnect code to connect. Please note that the Window Stack does not allow a device to
connect until the Com Port is opened. CodeXML® Router must be installed or the serial application must be
started before the QuickConnect Code is read.
5. Scan the QuickConnect Code generated in step 3. Windows will prompt for a Passkey. The default Passkey
is “12345678”.