Code CR3500 - Manual (Page 57)

C004387_07_CR3500_ User_Manual - 51 Save Settings
1-Dimensional Codes ONLY (1024 X 200 pixels)
Caution: It may be more difficult to read other codes while in this setting. You must have the reader farther away than normal.
Small 2-Dimensional Codes (480 x 480 pixels) Medium 2-Dimensional Codes (512 x 512 pixels)
Large 2-Dimensional Codes (640 x 640 pixels) Reset to Default Setting (1024 X 640 pixels)
Users may optimize the CR3500 decode zone if their application only requires one bar code format. If the size and density of the bar
codes to be scanned are consistent, please select the setting below that best describes your environment.
5.3 - Mirror Decoding
Scan the following codes to enable/disable the mirroring feature:
On Off (Default)
Note: The Mirroring feature allows the CR3500 to read codes as they are seen through a mirror (inversed 180°). If the Mirroring
feature is enabled, non-mirrored reading ability will be disabled.
5.2 - Windowing
(Continued)
5.4 - Anti-Glare
Anti-glare technology improves performance on highly reflective surfaces. The CR3500 will detect when the glare from the
illumination LEDs is preventing the reader from being able to decode the bar code. Once glare is detected the reader will attempt to
control the illumination LEDs to remove or reduce the glare thereby improving performance.
Enable Anti-glare (default) Disable Anti-glare