Emergency stop key (e-stop) – Cybex 525T Treadmill User Manual

Page 10

Advertising
background image

10

Cybex Owner’s Manual

Emergency Stop Key (e-stop)

The e-stop key functions as an emergency stop. In an emergency situation, the e-stop key

disengages from the console and the treadmill will come to a stop. Before using the treadmill, clip the

e-stop key as described below.

1. Compress the spring and clip the e-stop clamp to your clothing. Ensure the clip engages

enough clothing so it does not fall off in an emergency situation. Be sure the string is free of

knots and has enough slack for you to workout comfortably with the e-stop key in place.

2

1

1

Clothing

2

Clip

2. Without falling off the treadmill, carefully step backward until the e-stop pulls out of the

console. If the e-stop clip falls off your clothing then the test has failed. Reclip the e-stop clip to

your clothing and repeat this step.

3. Replace the e-stop key.
4. The treadmill is now ready to be used. Ensure the e-stop clip is secured to your clothing at all

times during use.

5. After use, remove the e-stop key from the treadmill.

The e-stop key can be removed to help prevent unauthorized use. Refer to the Stopping the Treadmill

section in the Operation chapter for more information about the e-stop key.

Advertising
This manual is related to the following products: