DFI HU968 - Manual (Page 24)

www.dfi .com Chapter 3 Hardware Installation
24
Chapter 3
7. Press HU968 down firmly until it is completely seated on the COM Express connectors of
the carrier board.
BIOS ROM socket
Note:
The above illustration shows the pressing points of the module onto the carrier board.
B e careful when pressing the module, it may damage the socket.
6. Grasping HU968 by its edges, position it on top of the carrier board with its mounting
holes aligned with the bolts on the carrier board. This will also align the COM Express
connectors of the two boards to each other.
COM Express connectors
on HU968
COM Express connectors
on the carrier board
COM Express connectors
on the carrier board
HU968
Pressing points