DFI KB968 - Manual (Page 14)

www.dfi .com Chapter 3 Hardware Installation
14
Chapter 3
Connectors
CPU Fan Connector
Connect the CPU fan’s cable connector to the CPU fan connector on the board. The cooling fan
will provide adequate airflow throughout the chassis to prevent overheating the CPU and board
components.
BIOS Setting
“PC Health Status” submenu in the Advanced menu of the BIOS will display the current speed
of the cooling fan. Refer to the chapter 4 of the manual for more information .
COM Express Connectors
The COM Express connectors are used to interface the KB968 COM Express board to a carrier
board. Connect the COM Express connectors (located on the solder side of the board) to the
COM Express connectors on the carrier board.
Refer to the “Installing KB968 onto a Carrier Board” section for more information.
COM Express Connectors
Refer to the following pages for the pin functions of these connectors.
3
1 Sense
+12V
Ground