DFI KB968 - Manual (Page 28)

www.dfi .com Chapter 3 Hardware Installation
28
Chapter 3
7. Press KB968 down firmly until it is completely seated on the COM Express connectors of
the carrier board.
COM Express connectors
on the carrier board
KB968
Pressing points
BIOS ROM socket
Note:
The above illustration shows the pressing points of the module onto the carrier board.
B e careful when pressing the module, it may damage the socket.
6. Grasping KB968 by its edges, position it on top of the carrier board with its mounting
holes aligned with the bolts on the carrier board. This will also align the COM Express
connectors of the two boards to each other.
COM Express connectors
on KB968
COM Express connectors
on the carrier board