Digi-Star StockWeigh 550 EID - Manual (Page 9)

Operators Manual
D3645 5
Changing Options Using Long Form Setup
1. Enter the Long Form Setup by holding [Net-Gross] and pushing [ON/Record] for three
seconds.
2. Press [On/Record] to advance to the desired parameter.
3. Press [Net/Gross] to advance to the proper setting.
4. Press [On/Record] to save setting and advance to the next parameter.
5. Hold [Tare] and press [On] to return to indicator operation.
Default Settings
Default settings for the indicator are as follows:
ZTRACK ON date (SET)
W MTHD 4 TareAP off
LOCKON 8 l prt off
LKNHLD Off scorem 0
AUTOFF off aprint off
LSTORE AUTEID prtfmt Auto
Lssend OFF c1 dly off
Estore ON c2 dly off
Izero on count 1
EIDAUT 0FF arange on
TOME F 24 HR lb-kg lb
TIME (SET) cap 40000
Date F 2
These parameters can be selected, de-selected or adjusted to fit the way you use the scale. See
below for descriptions.
ZTRACK Zero Tracking
If “ON”, the scale will adjust for small weight variances of up to 5lbs
in the Lock-On weigh method. This allows the scale to compensate
for such things as mud or snow accumulation on the scale platform.
W MTHD Weigh Method
Weigh method allows the operator to adjust how much processing
or number-crunching the scale processor does to the load cell data
before displaying the weight. See Appendix “B” for details. Select
weigh method #4 “Lock-On” for animal weighing.
LOCKON Lock-On
Available settings are 1 thru 9. A low value, such as a 1 or 2,
allows the system to be more sensitive to animal motion. A high
value, such as an 8 or 9, allows the scale to lock on faster. Use
the lowest setting that still allows the system to lock on
consistently.