Hummer 2006 H2 User Manual

Page 165

Advertising
background image

Manual Operation

You may manually adjust the air delivery mode or
fan speed.

w9x

(Fan): The switch with the fan symbol allows

you to manually adjust the fan speed. Press the up
arrow to increase fan speed and the down arrow
to decrease fan speed.

Pressing this button when the system is off will turn the
system on.

C

(Mode): Press this button to manually change the

direction of the airflow in your vehicle; repeatedly
press the button until the desired mode appears on
the display.

If you press the mode button to select an air delivery
mode, the display will change to show you the selected
air mode delivery. The display will then show the current
status of the system. When the system is turned off, the
display will go blank after displaying the current status of
the system.

H

(Panel): This setting will deliver air to the

instrument panel outlets.

)

(Bi-Level): This setting will deliver warmer air to the

floor and cooler air to the instrument panel outlets.

6

(Floor): This setting will deliver air to the

floor outlets.

-

(Defog): See “Defogging and Defrosting” later in

this section.

@

(Recirculation): Press this button to limit the

amount of outside air entering your vehicle. The light on
the recirculation button will glow. This is helpful when you
are trying to limit odors entering your vehicle and for
maximum air conditioning performance in hot weather.
Press this button again to allow outside air to enter the
vehicle. The light on the recirculation button will go off.

Pressing this button also cancels the auto recirculation
feature. To resume the auto recirculation function, press
the AUTO button. Each time the vehicle is started, the
system will revert to the auto recirculation function.

If you select recirculation while in defrost, defog or floor,
the light in the button will flash and then go out to let you
know that this is not allowed. This is normal and helps to
prevent fogging.

When the weather is cool or damp, operating the system
in recirculation for extended periods of time may cause
fogging of the vehicle’s windows. To clear the fog, select
either defog or front defrost.

You may also notice that the A/C compressor will run
while in recirculation mode. This is normal and helps to
prevent fogging.

3-25

Advertising