Raising the midgate – Hummer 2006 H2 User Manual

Page 89

Advertising
background image

3. Press either one of the two power midgate

®

latch

release buttons. The midgate

®

will move slightly

forward from its closed position. The latch release
buttons operate while the ignition is in RUN,
ACCESSORY, in RAP mode, or up to ten minutes
after removing the key. If necessary, press the
global express-down button to reactivate the release
buttons for an additional ten minutes.

4. Pull the midgate

®

inward and down to its fully

lowered position.

5. Flip the auxiliary panel on the top of the midgate

®

into position to bridge the gap created by the
hinges in the midgate

®

. There are two finger holds

on the panel.

Raising the Midgate

®

To raise the midgate

®

, do the following:

1. Fold the auxiliary panel back into the exterior of the

midgate

®

. The panel should snap loudly back into

position which means it is secure.

2. Reverse the steps for lowering the midgate

®

listed

previously. The midgate

®

must be fully latched on

both sides before the window can be raised.

3. Press the top part of the midgate

®

window switch to

express-up the window. To stop the window, press
the switch a second time.

2-13

Advertising