Hummer 2006 H2 - Manual (Page 431)

7. Make sure nothing is located under or in front of the
seat and then lift the rear driver’s seat so that the
floor is exposed. See 60/40 Split Bench Seat
on page 1-6 for more information.
8. Place the narrow end of the tool bag under the
seat rails as shown. Slide the tool bag under the
rear seat.
Be careful not to pinch the seat cables or electrical
harnesses.
9. Reinstall the strap to the seat rail.
10. Return the seat to the correct position.
Storing a Flat or Spare Tire and
Tools (SUV)
Storing the Flat or Spare Tire (SUV)
Use the following art and text to help you store the
spare or flat tire back into its proper location when you
are done.
To store the flat or spare tire on the tire carrier, do
the following:
1. Close the tire carrier. See Tailgate/Spare Tire
Carrier on page 2-14 for tire carrier operation.
2. Place the flat or spare tire onto the tire carrier with
the outside of the wheel facing you.
3. Reinstall the three nuts holding spare or flat tire to
the tire carrier. Tighten the nuts by hand.
5-101