Hummer 2006 H2 - Manual (Page 409)

Removing the Tools (SUV)
The equipment you will need is located under the
driver’s side second row seat. To remove the equipment,
do the following:
1. Make sure nothing is under the front of the driver’s
side second row seat.
2. Locate the tools by lifting the driver’s side second
row seat up to expose the floor. See 60/40 Split
Bench Seat on page 1-6 for more information.
3. For the jack A tool bag, carefully slide the tool bag
under the seat rail to remove it from the vehicle.
For the jack B tool bag, remove the strap from the
seat rail. Then carefully slide the tool bag out
from under the seat rail as shown.
Jack A Tool Bag
Jack B Tool Bag
5-79