Cd adapter kits, Playing a cd – Hummer 2006 H2 User Manual

Page 213

Advertising
background image

If the cassette tape is not playing correctly, for any other
reason, try a known good cassette.

If any error occurs repeatedly or if an error cannot be
corrected, contact your GM dealer. If the radio displays
an error message, write it down and provide it to
your GM dealer when reporting the problem.

CD Adapter Kits

It is possible to use a portable CD player with the
cassette tape player after activating the bypass feature
on your tape player.

To activate the bypass feature, perform the
following steps:

1. Turn the ignition on.

2. Turn the radio off.

3. Press and hold the TAPE DISC button for

five seconds. READY will appear on the display and
the tape symbol on the display will flash, indicating
the feature is active.

4. Insert the adapter into the cassette tape slot. It will

power up the radio and begin playing.

The override feature will remain active until the eject
button is pressed.

Playing a CD

Insert a CD partway into the slot, label side up. The
player will pull it in and the CD should begin playing. If
you want to insert a CD with the ignition off, first
press the eject button or the INFO knob.

If the ignition or radio is turned off with the CD in the
player, it will stay in the player. When the ignition
or radio is turned on, the CD will start playing where it
stopped, if it was the last selected audio source.

When a CD is inserted, the CD symbol will appear on
the display. As each new track starts to play, the
track number will appear on the display.

The CD player can play the smaller 3 inch (8 cm) single
CDs with an adapter ring. Full-size CDs and the
smaller CDs are loaded in the same manner.

If playing a CD-R, the sound quality may be reduced
due to CD-R quality, the method of recording, the quality
of the music that has been recorded, and the way the
CD-R has been handled. There may be an increase
in skipping, difficulty in finding tracks, and/or difficulty in
loading and ejecting. If these problems occur, check
the bottom surface of the CD. If the surface of the CD is
damaged, such as cracked, broken, or scratched, the
CD will not play properly. If the surface of the CD
is soiled, see Care of Your CDs and DVDs on
page 3-113
for more information.

If there is no apparent damage, try a known good CD.

3-73

Advertising