Setting preset stations, Setting the tone (bass/middle/treble) – Hummer 2006 H2 User Manual

Page 218

Advertising
background image

To scan preset stations, press and hold either the
SCAN or the TYPE arrows for more than four seconds.
PSC will appear on the display and you will hear a
double beep. The radio will go to a preset station, play
for a few seconds, then go on to the next preset
station. Press either the SCAN or the TYPE arrows
again to stop scanning presets.

The radio will only scan stations with a strong signal
that are in the selected band.

Setting Preset Stations

Up to 30 stations (six FM1, six FM2, and six AM,
six XM1 and six XM2 (if equipped), can be programed
on the six numbered pushbuttons, by performing
the following steps:

1. Turn the radio on.

2. Press BAND to select FM1, FM2, AM, or XM1

or XM2.

3. Tune in the desired station.

4. Press and hold one of the six numbered

pushbuttons until you hear a beep. Whenever that
numbered pushbutton is pressed, the station
that was set will return for that pushbutton.

5. Repeat the steps for each pushbutton.

To store an equalization setting to a preset station
perform the following:

1. Tune to the preset station.
2. Press and release the AUTO EQ button to select

the equalization setting.

Once the equalization no longer appears on the
display, the equalization will be set for that preset
station.

Setting the Tone (Bass/Middle/Treble)

AUDIO: Push and release the AUDIO knob until BASS,
MID, or TREB appears on the display. Turn the knob
to increase or to decrease. The display will show
the bass, midrange, or treble level. If a station is weak
or noisy, decrease the treble.

To adjust the bass, midrange, or treble to the middle
position while it is displayed, push and hold the AUDIO
knob. The radio will produce one beep and adjust
the display level to the middle position.

To adjust all tone and speaker controls to the middle
position, push and hold the AUDIO knob when no tone
or speaker controls are displayed. ALL CENTERED
will appear on the display and you will hear a beep.

AUTO EQ (Automatic Equalization): Press this button
to select customized equalization settings designed
for custom or talk.

The radio will save separate AUTO EQ settings for each
preset and source.

3-78

Advertising