MovinCool Office Pro W20 - Manual (Page 21)

21
OPERATION (cont.)
Set Clock
Prior to operating the Office Pro W20 users should set the clock of the controller
to the correct time as shown in the following steps:
1. Press and hold the SET
CLOCK button for 3
seconds or until beep.
(LCD indicates blinking
“CLOCK” and blinking
“day of the week”.)
2. Press SET TEMP buttons
to scroll day of the week.
3. Press ENTER button.
4. Press SET TEMP buttons
to select correct hour.
5. Press ENTER button.
6. Press SET TEMP buttons
to select correct minute.
Press SET CLOCK button
to exit clock mode.
Note: User should check clock periodically to confirm clock accuracy.
Operating in COOL Mode
1. The unit can be operated in COOL mode by pressing the COOL ON/OFF
button (LCD indicates “COOL ON”).
Note: In COOL mode the unit can only be turned off by pressing the COOL
ON/OFF button.
2. Change the fan speed by pressing the FAN HI/LO button.
3. Change the temperature set point by pressing the SET TEMP buttons ( / ).
Note: When turning the unit on, the set point and fan speed are determined by
the last operating mode. (This function does not apply to PROGRAM mode.)
Step 1 & 6
Step 2 to 5
ILL00054-00