MovinCool Office Pro W20 - Manual (Page 31)

31
INSPECTION & MAINTENANCE (cont.)
Water Regulating Valve (cont.)
Adjustment of Water Regulating Valve Setting (cont.)
6. Rotate the adjusting bolt with a wrench to adjust the valve temperature setting
according to the “Valve Setting Guide Table” on page 32. The painted line on
adjusting bolt and housing is for rotational reference to complete one rotation
(360°).
Note: The default marking line on the housing is for adjustment reference. The
painted line on adjusting bolt and housing is for rotational reference. Each
completed rotation of the adjusting bolt is resulting in about 0.04 inch (1 mm)
displacement of the adjusting plate.
DIRECTION OF ROTATION TEMPERATURE SETTING
Clockwise Lower
Counterclockwise Higher
ILL00206-00
LOWER HIGHER
PAINTED LINE
ADJUSTING BOLT
ILL00207-00
DEFAULT MARKING
LINE
ADJUSTING PLATE