Olson Technology S890D - Manual (Page 3)

025-000487 Rev A Page 3
Switch No. 1 2 3 4 5 6
STANDARD 0 0 0 0 0 0
HRC 0 0 0 0 1 1
RF input levels can range from -10dbmv to +25dbmv. Video output level is constant over this range at
1 volt p-p into 75 ohms.
There is a front panel "POWER" indicator when the unit is connected to the proper power source. The
AC power required is printed on the rear panel near the power cord.
The fuse rating is also printed on the rear panel. Always replace fuse with the correct rating.
Unused outputs do not need to be terminated for correct operation.