Onwa Marine Electronics KV-300 - Manual (Page 28)

10.3
Coordinates (latitude and longitude) can be manually inserted without any conn-
ection to a GPS antenna. Follow these steps:
Keep pressed MENU/SELECT until the display indicates DSC CALL
Scroll through the functions and select GPS;
GPS
Confirm with the MENU/
SELECT button
Latitude and longitude may be modified by pushing MENU/SELECT and
scrolling the digits with UP/DOWN
UTC (Universal Time Coordinate) Tempo Universale Coordinato) may be
modified by pushing MENU/SELECT and scrolling the digits with UP/DOWN
Confirm by pushing MENU/SELECT
With the UP/DOWN keys scroll through the digits and insert UTC
To return to radio mode, press PTT, select EXIT which is present in every menu
or wait for 1 minute and the radio will automatically exit.
For a better efficiency of the DSC service, we suggest you insert coordinates and
time. If KV-300 is connected to a compatible GPS receiver Module, the setting of
these data is not compulsory.
10.4
KV-300 is compatible with almost all the GPS receivers available on the
market. Verify the compatibility with your receiver.
GPS receivers use different strings; in the KV-300 menu you can enable/disable
many types of strings.
According to your needs, select the desired string following this procedure:
Hold down MENU/SELECT until DSC CALL appears on the display
Scroll the list of functions with the UP/DOWN keys
Select GPS SELECT and confirm by pushing MENU/SELECT
Strings are all active by default, therefore you have to disable the undesired
ones.
Select it with UP/DOWN keys and confirm by pushing MENU/SELECT.
Select ON or OFF and confirm.
To return to radio mode, push PTT, select EXIT in every menu or wait for 1
and the radio will automatically exit.
.
GPS SELECT
Minute
Data Input Format(GPGGR,GPRMC,GPGNS,GPGLL)
24
To modify some addresses repeat the above described procedure till the display
shows the address to change. Now press MENU/SELECT.
Select EDIT to change the name or code.
Select DELETE to cancel that address.
You can store up to 16 addresses. If the directory is fulled up, Full will appear
on the display, you cannot add further addresses. In this case it is necessary
to cancel some.