Onwa Marine Electronics KV-300 - Manual (Page 31)

10.10 ATIS (Setting of ATIS code and activation
deactivation of automatic transmission)
Your marine transceiver is able to activate, if necessary, an automatic transmission
of your ATIS identification code each time t he PTT is released. This function
is only used when navigating in internal navigable European waters which
require automatic transmission of identification.
The user can request an ATIS code from the same authority which releases the
radio operators licenses.
Hold down MENU/SELECT until DSC CALL appears on the display
Scroll the list of functions with the UP/DOWN keys
Select SET UP and confirm by pushing MENU/SELECT. MMSI will be displayed
Scroll the list of functions with the UP/DOWN keys
Select ATIS MMSI and confirm by pushing MENU/SELECT.
You can now enter the ATIS MMSI code. After the final digit is entered, press
MENU/SELECT, the radio displayed Scroll Press select Button t o confirem
MMSI
pushing MENU/SELECT. MMSI will be display ATIS MMSI
Pushing MENU/SELECT will confiremed.
The ATIS MMSI code may be enabled or disabled according to your needs.
Following
Hold down MENU/SELECT until DSC CALL appears on the display
Scroll the list of functions with the UP/DOWN keys
Select SET UP and confirm by pushing MENU/SELECT. M MSI w ill b e d isplayed
Scroll the list of functions with the UP/DOWN keys
Select ATIS MMSI and confirm by pushing MENU/SELECT
Select ATIS ON/OFF Scroll the list of functions with the UP/DOWN keys
Pushing MENU/SELECT confirm. Choose ON or OFF, Press MENU/SELECT
confirm.
If regulations in your community do not allow you programming the ATIS code
by yourself, contact your approved vendor for programming.
Activate the ATIS code only when requested by the proper authorities.
We remind you that when the ATIS function is activated, DSC call are disabled.
27