Onwa Marine Electronics KV-300 - Manual (Page 6)

2
1.2.3 Automatic Transmitter Identification System (ATIS)
Your marine transceiver may activate, if necessary, the ATIS function. The ATIS
function may be activated when using the transceiver within the internal navigable
waters of Europe which require the automatic transmission of identification.
For further details, please contact your local authorities.
1.2.4 Environmental
Pay attention to ambient conditions although KV-300 is designed to operate under
the most severe conditions, it is important to avoid exposure to environments that
are excessively humid or dusty, or to temperatures outside the 15 to +55
range.
Also avoid exposure to direct sunlight.
Avoid jarring and excessive vibration KV-300 is built to resist mechanical shock
and vibration as long as these are within the norm for any electrical device.
Do not use this device in potentially explosive environments. A single spark
may cause an explosion.
1.3 ETSI Information
ETSI (European Telecommunications Standards Institute) has established specific
requirements (EN 301 025-2/3) for marine transceivers with DSC function class
For use on non-SOLAS vessels.
1.4 Assistance
We urge you to write the serial number of your transceiver in the space provided
below. This number is found on the back panel of the transceiver and will be
useful in the event of repair/assistance and/or loss and/or theft..
1.5 Manual Notes
Writing of this manual has been completed with the intention of supplying
information that are comprehensive, precise and up-to-date. Nevertheless, the
manufacturer does not assume responsibility for the actual correspondence with the
product and for the consequences of possible errors caused by factors over which it
has no control. Equipment and options described may differ according to varying
countries.
Warning:
User may hold the PTT five minutes, but the device should be placed in inaccess-
ible areas to avoid burns others.
Long-Time emission may shorten the life of the equipment.