OpenEye GraniteRack 3U - Manual (Page 44)

Configuring
3-6
Keyboard Function Key Definitions
“ A “ key - to move to the line above
“ Z “ key - to move to the next line
“ Enter “ key - Submit selection function
“ ESC “ key - Return to previous screen
“ L ” key - Line draw
“ X ” key - Redraw
9. Now, the VT100 is ready to use. After you have finished the VT100 Ter-
minal setup, you may press “ X “ key (in your Terminal) to link the RAID
subsystem and Terminal together. Press “X’ key to display the disk array
Monitor Utility screen on your VT100 Terminal.
10. The Main Menu will appear.