OpenEye GraniteRack 3U User Manual
Page 61
Advertising
Configuring
3-23
3.6.4 Activate Incomplete Raid Set
When one of the disk drive is removed in power off state, the raid set state
will change to Incomplete State. If user wants to continue to work, when the
RAID subsystem is power on. User can use the Activate Raid Set option to
active the raid set. After user complete the function, the Raid State will
change to Degraded Mode.
To activate the incomplete the raid set, click on the Activate Raid Set link. A
“Select The RAID SET To Activate” screen is displayed showing all raid set ex-
isting in the current controller. Click the raid set number you which to activate in
the select column.
Advertising