OpenEye GraniteRack 3U - Manual (Page 53)

Configuring
3-15
3.4 Web browser-based Remote RAID management via
R-Link ethernet port
Configuration of the internal RAID subsystem with remote RAID management is
a web browser-based application, which utilizes the browser installed on your
operating system. Web browser-based remote RAID management can be used
to manage all the raid function.
To configure internal RAID subsystem on a remote machine, you need to know
its IP Address. Launch your web browser by entering http://[IP Address] in the
remote web browser.
Important:
The Ethernet default IP is “192.168.001.100”. DHCP function is
“enable”. You can configure correct IP Address through the LCD panel
or the terminal “Ethernet Configuration” menu.
Note that you must be logged in as administrator with local admin rights on the
remote machine to remotely configure it. The RAID subsystem controller default
User Name is “admin” and the Password is “00000000”.
!