OpenEye GraniteRack 3U - Manual (Page 69)

Configuring
3-31
3.7.3 Modify Volume Set
To modify a volume set from a raid set:
(1). Click on the Modify Volume Set link.
(2). Tick on the volume set from the list that you wish to modify. Click on the
Submit
button.
The following screen appears.
Use this option to modify volume set configuration. To modify volume set attribute
values from raid set system function, move the cursor bar to the volume set
attribute menu and click on it. The modify value screen appears. Move the cursor
bar to an attribute item, and then click on the attribute to modify the value. After
you complete the modification, tick on the Confirm The Operation and click on
the Submit button to complete the action. User can modify all values except the
capacity.
3.7.3.1 Volume Expansion
Volume Capacity (Logical Volume Concatenation Plus Re-stripe)
Use this raid set expands to expand a raid set, when a disk is added to your
system. (refer to section 3.6.3)
The expand capacity can use to enlarge the volume set size or create another
volume set. The modify volume set function can support the volume set expan-
sion function. To expand volume set capacity value from raid set system
function, move the cursor bar to the volume set Volume capacity item and
entry the capacity size.
Tick on the Confirm The Operation and click on the Submit button to com-
plete the action. The volume set start to expand.