OpenEye GraniteRack 3U - Manual (Page 75)

Configuring
3-37
3.8.3 Delete Pass-Through Disk
To delete pass-through drive from the pass-through drive pool, move the
mouse cursor bar to the main menus and click on Delete Pass Through
link. After you complete the selection, tick on the Confirm The Operation
and click on the Submit button to complete the delete action.
3.8.4 Identify Selected Drive
To prevent removing the wrong drive, the selected disk LED will light for
physically locating the selected disk when the Identify Selected Drive is
selected.
To identify the selected drive from the drives pool, move the mouse cursor bar to
click on Identify Selected Drive link. The Select The IDE Device For identifica-
tion screen appears tick on the IDE device from the drives pool and Flash method.
After completing the selection, click on the Submit button to identify selected
drive.