Orion System OE217-00 - Manual (Page 7)

Form: AAON-HZ-EBC-248-E-BUS-Adapter-1A.doc
Page 1 of 1
Description
The HZ-EBC-248 (AAON Part No.
V17180)
is comprised of the
MS000248 E-BUS Adapter Hub
and a 1.5 Foot EBC Cable (Part
No. EBC-1.5F).
The E-BUS Adapter Hub is used to
provide a connection point for
multiple E-BUS Sensors or
Modules. This E-BUS Adapter Hub
has four ports. One port is used to
connect the Hub to an E-BUS
Expansion Port on the VCB-X
Controller or a VCB-X Expansion
Module using the supplied EBC-
1.5F cable. This leaves three ports
available for E-BUS Sensors and
other Modules.
The EBC Cable is a plenum-rated
high flex cable with EBC
Connectors on each end of the
cable for connection between the
Sensors, Modules, and the VCB-X
Controller.
Technical Data HZ-EBC-248 E-BUS Adapter Hub with 1.5 Ft. EBC Cable
EBC E-BUS Cable
Available Length and
Part Number EBC-1.5F (1.5 Foot) Current Rating of
Cable Wire
300 Vrms Min = 10.15 Ohms per 1000
feet @ 20 Deg Celsius, Nominal
Cable Type Plenum-rated High Flex Wire Wire Colors Red/Black First Pair; White/Blue Second
Pair
Wire Size 19 Strands of 32 Gage Wire, 4
Conductor
UL Listing No. CMP/CL3P/FPLP
Terminations Hub - (4) EBC Connectors
Cable – 2 EBC Connectors
Cable Sheath
Color White, Plenum Rated CL3P/CMP
with “WATTMASTER EBUS”
marking every foot.
Three Year Warranty WattMaster reserves the right to change specifications without notice
HZ-EBC-248 - E-BUS Adapter Hub
with 1.5 Ft. EBC Cable