RJS Inspector D4000 Laser (FIRMWARE version A.05 and Earlier) - Manual (Page 24)

Model L1000 Laser Inspector TM Operator ’ s Guide
RJS, Minneapolis, MN 002-5568 18
Database XX
Storage YY
The cursor will be on the “D” in database.
The “Xs” in the above sample represent one of the following displays for the database:

EMPTY (There is no data in the database buffer)

XX% (Percentage of active database buffer that is filled, 0 - 99%)
The “Ys” in the above sample represent one of the following displays for storage:

Inactive (Store and Print buffer not enabled)

YY% (Percentage of active storage buffer that is filled, 0 - 99%)

0 KB (No storage was reserved in the Setup procedure)
With the cursor on Storage, press Enter to toggle the Storage function between enabled and
disabled.
When Storage is activated, by pressing Select, the cursor will position to the percentage sign
(%). To clear the storage buffer, press Enter with the cursor on the % sign00% will
display. (Press Enter again if you cleared the buffer by mistake.)
Press Select again to return to the Main Menu.
Note: For an explanation about printing the contents of the Store and Print buffer See Appendix E.
Note: Deactivating the database function does not alter the contents of the database buffer. See Appendix J
(Downloading Data).