RJS Inspector D4000 Laser (FIRMWARE version A.05 and Earlier) - Manual (Page 48)

Appendix E Operator ’ s Guide
RJS, Minneapolis, MN 002-5568 42
Appendix E (Print Functions)
Print Functions
Scanned data may be printed if the Laser Inspector is connected to a printer with a serial
interface cable.
Press the Print button at any time to display “Printout Type” on the upper row of the display.
The lower row will contain one of two options that are scrolled with the Select button.
With the selected option chosen, press either Enter or Print to start printing. (The choice is
saved in non-volatile memory so that printing can be halted by pressing Select and Enter at
the same time, until the Main Menu displays.)
Printout Options
Analysis
This option prints the analysis data for the last symbol scanned. This option can also be used
to print each individual symbol in the multiple scan mode prior to the last scan being com-
pleted.
Storage
This option prints all analysis data stored in the buffer. The last barcode that was scanned is
printed first.
When printing the buffer in multiple scan mode, don’t initiate printing before all scans of the
current analysis are complete, otherwise, some completed scans could be lost.