Synaps CHD-3000 - Manual (Page 21)

21
picture. System will force press wide screen
picture to be narrow and there
’
re black band on
left and right site. Auto means system won
’
t do
any aspect ration translation, 16:9 picture source
will be good display on a 16:9 TV but will be too
narrow on a 4:3 TV, and 4:3 picture source will be
too wide in a 16:9 TV but will be good
display in a 4:3 TV.
3 Video Output: Press [Left/Right] to select
RGB or YUV.
4 RF system and RF channel are for user to set the
TV RF modulator output signal VHF/UHF channel
and TV system mode. If your TV is too old to
supports CVBS/YPbPr/HDMI, you can use TV RF
cable to connect STB’s TV RF output port to TV
Antenna input port.
5 Digital Audio Out is for setting the both SPDIF and
HDMI’s digital audio output mode, it has options
LPCM Out, Auto, You can press [Left/Right] Key to
select each mode circularity. LPCM Out means
system will decode no matter AC3 or PCM audio
track data to be LPCM, digital audio decoder or
HDMI TV will get LPCM digital audio data. Auto
means system will detect which the connected
HDMI TV can decode and then output that data. If
HDMI TV can decode AC3, system just output
RAW data, if HDMI TV can decode LPCM only,
system will just decode AC3 or LPCM to be LPCM
and then output.
6 Press [Exit] key to draw back from “TV
System” menu.
12.3 Local Time Setting
When you enter to “Local Time Setting” menu,
you will see the screen like below:
GMT Usage: This item is use for open the
usage of GMT. You can press [Volume Up /
Volume Down] keys to switch “On/Off”.
The “GMT Offset” item is valid only when the
setting of “GMT Usage” is “Yes”. You can
press [Volume Up / Volume Down] keys to
switch “GMT Offset” value, and the range is
“-12:00 ~ +12:00”, increase each half hour
progressively.
You can press [Left/Right] to control Summer
time on or off.
“Date” and “Time” items are valid only when
the setting of “GMT Usage” is “No”. You can
press [Volume Up / Volume Down] keys to
moving highlight and use number keys to input
directly.
If the current channel provides the correct time
information, you will see the current time while
you enter “Time” menu. If the channel doesn’t
provide time information, you have to input the
date and time information manually.
Press [Exit]key to draw back from “Local
Time Setting” Menu.
12.4 Timer
Press [enter] key to open timer menu.
Current time information will display on the
first column; if the current time is incorrect,
please modify the time information in “Time”
item.