Synaps CHD-3000 - Manual (Page 26)

26
4 In step 1 and step 2, press[Exit]key can
draw back from this item and without
saving.
13.2.2 Delete All Channel:
When you press [OK] key in the “Delete All
Channel” item, it will pop a dialogue ask you
whether confirm to delete all channel. If you
select “OK”, all the channel will be deleted.
13.2.3 LED Power In Standby
I n"VFD Power in"menu,there are two options,
“On” and “Off”, for your selection. If the setting is
“On”,when you press [power] key to standby,the
VFD will display the time and "STANDBY", If the
setting is “Off”,when you press (power)key to
standby,the VFD will not display the time and
"STANDBY".
Press [Exit] to draw back from "Default Setting"
menu.
13.2.4 Scart Loop
This Scart Loop item have two options "ON" and
"OFF", if setting is ON, will enable "SCART
LOOP" and "TUNER LOOP" function when
receiver is in standby, if setting is OFF, will
disable "SCART LOOP" and "TUNER LOOP"
function when receiver is in standby.
13.3 Software Upgrade
Upgrade by RS232:
1. We offer the functions for user to connecting
receiver (Master) to the other receiver
(Slave) via serial interface.
2. Connect master receiver to slave receiver
via serial interface. Enter “Software
Upgrade” menu in master receiver and
press[Volume Up/Volume Down]keys to
switch upgrade mode.
Upgrade modes include: code / Program
List / user back /video back / radioback /
defaultdb / code + program/ Default DB +
User DB..
3. Moving highlight to “Start” on master reeciver
and press[OK]key to start upgrade.
4. Turn on slave receiver and it needn’t operate
any setting.
5. Press [Exit]key to draw back.