Allmand Brothers NL PRO II - Manual (Page 16)

16
TRAILERING, TRANSPORTING AND LIFTING
PREPARING THE NIGHT LITE PRO II FOR DELIVERY OR RENTAL
The NIGHT LITE PRO II light tower requires service as well as proper operation in order to provide
the performance and safety it has been designed for. Never deliver or put machine into service with
known defects or missing instructions or decals. Always instruct the customer in proper operation
and safety procedures as described in this Operator’s Manual. Always provide the manual with the
equipment for proper and safe operation.
CHECK LIST
 Visually inspect the equipment to ensure that all instructions and decals are in place and legible.
 Inspect the light tower locking bar latch assembly which locks the light tower in the vertical posi-
tion for proper operation.
 Check the hitch assembly and safety chains.
 Check the outriggers and jacks to make sure they operate properly.
 Inspect the light assemblies for damage and test for proper operation.
 Inspect the electrical wiring for signs of damage. Danger! Electrocution Hazard.
Do not operate the light tower if the insulation on the electrical cord or other
electrical wiring is cut or worn, or if bare wires are exposed. Repair or re-
place damaged wiring before starting the engine.
 Check ground rod cable and the ground lug. Make sure they are clean, undamaged and func-
tional.
 Inspect tires to insure good condition and proper inflation.
 Check engine oil, fuel, engine coolant levels and hydraulic fluid levels, if equipped.
 Check to make sure the Light Tower Operator’s Manual and Generator Operator’s Manual are
with the equipment.
 Check to make sure the quick reference operation card is with the equipment and properly teth-
ered.
 Inspect the machine physically for damage and repair if necessary.
NOTICE: See appropriate section of the Engine Operator’s Manual and Generator Operator’s
Manual for additional pre-operation checks.