Allmand Brothers NL PRO II - Manual (Page 8)

8
SAFETY
SAFETY DEFINITIONS
Safety statements are one of the primary ways
to call your attention to potential hazards. Fol-
low the precautions listed throughout the man-
ual before operation, during operation and dur-
ing periodic maintenance procedures for your
safety, the safety of others and to protect the
performance of equipment. Keep the decals
from becoming dirty or torn and replace them if
they are lost or damaged. Also, if a part needs
to be replaced that has a decal attached to it,
make sure to order the new part and decal at
the same time.
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not
avoided, could result in minor or serious injury.
This safety alert symbol appears
with most safety statements. It
means attention,
become alert, your safety is in-
volved! Read and abide by the mes-
sage that follows the safety alert
symbol.
Indicates a situation which can cause damage
to the equipment, personal property and/or the
environment, or cause the equipment to oper-
ate improperly.
NOTE : provides key information to make pro-
cedures easier or clearer.
SAFETY PRECAUTIONS
There is not substitute for common sense and
careful practices. This information contains gen-
eral safety precautions and guidelines that must
be followed to reduce risk to personal safety.
Special safety precautions are listed in specific
procedures. Read and understand all of the
safety precautions before operating or perform-
ing repairs or maintenance. This safety section
cannot cover every situation that may occur that
is incidental to the use of the equipment.