Allmand Brothers NL PRO II - Manual (Page 54)

54
MAINTENANCE
CLEANING
Keeping the light tower clean is important to
ensure proper operation. Dirt and dust buildup
acts as an insulator and may cause the en-
gine, generator and light assemblies to oper-
ate at excessively high temperatures.
Use the following as cleaning guidelines:
 Use caution when using compressed air or
water / steam pressure washers. Do not
pressure - clean electrical components, as
this may damage electrical components.
 Clean the light tower and remove all dust
dirt or other foreign material.
 Inspect and clean the cooling air intake
and exhaust louvers of the enclosure.
Make sure they are clean. Remove dirt or
any buildup that may restrict the cooling air
flow.
 Clean the light tower and its components
with a damp cloth or sponge.
 Inspect and clean all engine linkages so
they operate properly.
Cleaning and Draining the Trailer bilge
Allmand NIGHT LITE PRO II light towers may
contain a sealed bilge designed to catch fuel,
oil or coolant spills. Should a spill occur, posi-
tion a suitable container beneath the unit and
remove the bilge drain plug. After the fluid has
been drained, reinstall the drain plug and dis-
pose of the fluid properly in accordance with
EPA or other governmental guidelines.