Date/time order, Daylight saving time setup, Network time protocol setup – ARM Electronics DVRHD OSD User Manual
Page 14
OSD Setup Manual
13
Date/Time Order
This item is used to set the order of Date/Time display to <Date First> or <Time
First>. Select this item and press UP / DOWN keys to change the setting.
Daylight Saving Time Setup
This function is for people who live in certain regions to observe Daylight Saving
Time. The menu displays as follows:
Daylight Saving Time Setup
Daylight Saving Time
DST Start
DST End
DST Bias
OFF
Apr. 1
st
Sun, 02:00
Oct. Last Sun, 02:00
60 Min
-
Daylight Saving Time
Select <ON> to enable, or <OFF> to disable the function. If the function
is disabled, the DST Start / End time and DST Bias will be grayed out and
cannot be accessed. If this function is enabled, the date/time information
will be shown on the screen with a DST icon when playing back recorded
video or searching video in the event list. “S” indicates summer time and
“W” indicates winter time.
-
DST Start / End
These items are used to set duration of daylight saving time. Use LEFT /
RIGHT to move the cursor to the previous or next field, UP / DOWN to
change the settings.
-
DST Bias
This item allows users to set the amount of time to move forward from the
standard time for daylight saving time. Available options are <30>, <60>,
<90> and <120> minutes.
Network Time Protocol Setup
After time zone is set, the <Network Time Protocol Setup> option will be available.
Network Time Protocol Setup
NTP Server
Automatically Time Sync
Manually Time Sync
time.nist.gov
ON
No