ARM Electronics DVRHD OSD - Manual (Page 33)

OSD Setup Manual
32
- Streaming Port
Streaming port is used for transmitting video and related commands.
- Streaming Protocol
Enter this item to select the streaming protocol of the IP camera. The
DVR supports the following streaming protocols: <RTP+RTSP>,
<RTP/RTSP>, <RTP/RTSP/HTTP> and <HTTP>.
NOTE: Please contact the manufacturer of the IP camera for
assistance if the IP camera’s Management Port/ Streaming Port/
Streaming Format/ Streaming Protocol are unknown.
- IP Dome Protocol
If the connected device is an IP Dome Camera, then select an
appropriate IP Dome Protocol from the provided options.
„ Device Setup
Enter this item to setup the basic settings of the IP camera. Upon entering this item,
the following message will be displayed.
Collecting data
Please wait!
If the connection cannot be detected, the following message will be displayed.
Please check the <Hostname/IP>, <Model> and <Connection Setup> again to
make sure the settings are correct.
Cannot get config from the IP device
When the connection is detected, the following menu will be displayed.
Device Setup
Product ID
Image Resolution
FPS
Compression
Quality
Sharpness
Brightness
Contrast
Saturation
Hue
Apply ****
CIF
15
40
Best
0
20
50
30
40
No