ARM Electronics DVRHD OSD - Manual (Page 41)

OSD Setup Manual
40
x Select <Average Normal PPS> and press ENTER, then press UP/DOWN to
choose a desired number of PPS. The <How Many Days To Record> will be
computed automatically.
x Select <Average Normal Quality> and press ENTER, then press UP/DOWN
to select a desired quality. The <How Many Days To Record> will be
computed automatically.
NOTE: The current number of connected cameras will affect the
recording quality automatically calculated by the <ezRecord Setup>.
Therefore, when there are cameras disconnected or connected, the
<ezRecord Setup> should be reset.
< Data Lifetime >
Data Lifetime indicates the duration that a video is saved and recallable in the HDD. Only
those video recorded during Data Lifetime can be retrieved for playback. The video
exceeded Data Lifetime will be hidden and cannot be retrieved for playback. Press ENTER
to select this item in Record Setup menu, and then use UP / DOWN keys to set the data
lifetime. The value ranges from <1> to <365> days, or select <0> to disable the function.
NOTE: If users want to playback a video which is beyond the data lifetime, please
extend the duration till the recording data/time of the video is included.
< Circular Recording >
Users can choose to record video in circular mode or in linear mode. If circular mode (set to
<ON>) is selected, the DVR will store new video data to overwrite the oldest recorded video.
If linear mode (set to <OFF>) is selected instead, the DVR will stop recording when HDD
capacity is full. The percentage of HDD usage will be displayed at the lower-left corner of
the screen. Furthermore, a reminder message “ALMOST FULL” will show up at the
upper-right corner of the screen when HDD usage reached 98%. In the mean time, an
internal buzzer will start beeping.
From the Record Setup menu, move the cursor to <Circular Recording> and press ENTER,
then select <ON> / <OFF> using UP / DOWN keys.
< Audio Recording >
This item allows users to enable / disable Audio recording function of the DVR. When it’s
set to <ON>, audio input is recorded and saved with the video. When it’s set to <OFF>,
audio is ignored.