ARM Electronics DVRHD OSD - Manual (Page 22)

OSD Setup Manual
21
„ SMTP Setup
Simple Mail Transfer Protocol (SMTP), a protocol for sending e-mail messages
between servers. SMTP is a relatively simple, text-based protocol that one or more
recipients of a message are specified and the message text is transferred.
Select < SMTP Setup> from Network Setup menu and press ENTER; the menu
displays as follows.
SMTP Setup
Email Via SMTP
SMTP Server
SMTP Port
SMTP Account
SMTP Password ON
25
- Email Via SMTP
The item enables users to determine if the DVR sends e-mail via SMTP.
Select <ON> to send e-mail via SMTP using direction keys; if not, select
<OFF>.
- SMTP Server
This item enables users to set the SMTP server. Contact the network
service provider for more specific information.
Follow the steps to setup the SMTP Server.
x Select <SMTP Server> from SMTP Setup menu and press ENTER. A
virtual keyboard displays.
SMTP Server
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 . ! @
# í _ , ” + = *
Ż Ź Backspace Delete
Cancel OK
x Use Direction keys to move the cursor to the desired character.
x Press ENTER to add the selected character to the entry field.
x When it’s done, move the cursor to <OK> and press ENTER to save
the settings and exit.