ARM Electronics DVRHD OSD - Manual (Page 37)

OSD Setup Manual
36
„ Max Rec. PPS
This item will be automatically changed according to record resolution.
„ CBR/VBR
This item allows users to select an encoding method for the unit.
CBR, standing for Constant Bit Rate, means a way to encode a file at a fixed
rate. That also indicates a CBR file has consistent file size and quality.
VBR, standing for Variable Bit Rate, allocates an appropriate amount of data
per second, depending on the complexity of the video file.
It's strongly suggested to use VBR encoding when reliable video quality is the
top priority.
NOTE: Since a VBR file doesn't have a fixed size, the HDD space
usage cannot be calculated and thus ezRecord function is not
supported for VBR mode. Therefore, if ezRecord is selected as the
preset record configuration, the option of this menu item will
automatically be set as <CBR>.
< Schedule Setup >
This submenu is used to set the day and night time, or weekend recording schedule. The
Day and Night schedules are for defining day time and night time; the Weekend schedule
can be modified for weekends and holidays.
Select <Schedule Setup> from the Record Setup menu and press ENTER; the following
menu is displayed.
Schedule Setup
Day Time Start
Day Time End
Night Time Start
Night Time End
Weekend Schedule
Weekend Start
Weekend End AM 06:00
PM 18:00
AM 06:00
PM 18:00
ON
Fri 18:00
Mon 06:00
„ Day / Night
ʳ Time Start / End
The Day/Night Start Time and End Time determines the duration of day/night
recording time. Time is indicated in 1-minute increments. The time display format in
this menu is based on the setting of <Time Display Mode> in <System Setup>.