7 advance menu ___detection – ARM Electronics RT4CD User Manual
Page 21
18
4.7 ADVANCE MENU ___DETECTION
4.7 ADVANCE MENU ___DETECTION
Move the cursor to “DETECTION” and press ”ENTER”. The screen will show the following
options.
DETECTION
DETECTION
TITLE
DET
AREA
LS
SS
TS
RE
ALARM
01
ON
SETUP
07
03
02
10
OFF
02
ON
SETUP
07
03
02
10
LOW
03
ON
SETUP
07
03
02
10
HIGH
04
ON
SETUP
07
03
02
10
OFF
DETECTION
DETECTION
DETECTION SETUP
DETECTION TIMER
1)
DETECTION SETUP:
a)
TITLE:
Show the camera title of each channel.
b)
DET:
Select “ON” to activate the motion detection function of the selected channel.
Select “OFF” to inactivate the motion detect function of the selected channel.
c)
AREA:
Press the “ENTER” button to set the detection area.
Pink blocks represent the area that is not being detected while the transparent blocks
are the areas under detection.
Press “ENTER” to confirm the
start area
Press ◄ or ► to choose the
width of the area
Press ◄ or ► to choose the
height of the area, and press
“ENTER” again to confirm.
Multi-detection areas
Press “－” to set the whole
area under detection
Press “＋” to set the whole
undetected