ARM Electronics RT4CD - Manual (Page 47)

44
Date Date
Record Setting Record Setting
In this menu, you can set the date for your DVR. Please DO NOT change the date or time
when the recording function is activated. See “2.1 GETTING STARTED” at P.10 for details.
c MANUAL RECORD MANUAL RECORD:
Specify whether to use manual
recording (YES / ON) and set IPS
number.
d EVENT RECORD EVENT RECORD:
Specify whether to user event
recording (YES / ON) and set IPS
number.
e TIMER RECORD TIMER RECORD:
Specify whether to use timer
recording (YES / ON) and set IPS
number.
c DATE DATE:
Choose the current date from
“DATE” drop-down menu and enter
the current time.
When you click the drop-down
menu, a calendar as shown below
shows for you to set the current
date.
d FORMAT FORMAT:
Choose the format for date display from the three options: Y-M-D, D-M-Y and M-D-Y.
e DAYLIGHT SAVING DAYLIGHT SAVING:
Specify whether to use daylight saving time (ON / OFF) and time period (START /
END), and adjust the daylight saving time in hour (ADJUST).
f OVER WRITE OVER WRITE:
Specify whether to overwrite the
HDD capacity when the HDD is full
(YES / NO).
g RECORD IMG SIZE RECORD IMG SIZE:
Choose “FRAME” or “CIF”. This
selection will affect the available IPS
options in the 3 recording modes
described above.
h RECORD QUALITY RECORD QUALITY:
4 options are available from the
drop-down menu: BEST, HIGH,
NORMAL and BASIC.
i TOTAL IPS SHARE TOTAL IPS SHARE:
Choose the IPS share as FIX or
GROUP.
4CH DVR
4CH DVR
NOTE:
For Model 3 & 4, the total IPS share is always
“FIX”. Selecting “GROUP” here is useless.
In this menu, you can set DVR record settings.