ARM Electronics RT4CD - Manual (Page 43)

40
Detection Detection
c Select the desired channel, and
press “
Edit Edit” to enter the motion
detection sensitivity and area
setting box.
d Motion Detection Sensitivity Motion Detection Sensitivity:
Set the detection sensitivity in 4
different adjustable factors.
LS: LS: The sensitivity of comparing
two different images. The smaller
the value, the higher sensitivity for
the motion detection.
SS: SS: The sensitivity towards the
size of the triggered object on the
screen (the number of motion
detection grids). The smaller the
value, the higher sensitivity for the
motion detection.
TS: TS: The sensitivity towards how
long the object stays in the
detection area to get triggered.
The smaller the value, the higher
sensitivity for the motion detection.
RE: RE: The value of RE is a reference
for the detection. The bigger the
value, the higher sensitivity for the
motion detection.
e Alarm: Alarm:
Select LOW / HIGH for the alarm
polarity.
f Motion Detection Area Motion Detection Area:
By clicking the area with your
mouse, one can choose the
motion area to be detected.
The The
under detected area is transparent under detected area is transparent
while the undetected area is in while the undetected area is in
pink color. pink color.
*Click “Select All” to activate the
detection area as the full area.
*Click “Clear All” to clean the
previously selected detection area.
After setting, press “OK” and then
press “APPLY” to confirm.
Note: Enable the motion detection function.
When the motion is triggered,
a “
” icon will be shown on the
screen. And the software AP will
start recording automatically.
4CH DVR