ARM Electronics RT4CD User Manual
Page 37
Digital Device Control Panel ~ PTZ
Digital Device Control Panel ~ PTZ
j.
Preset 1 ~ 16
k.
AUTO
l.
Zoom Tele Zoom Wide
m.
Focus Near Focus Far
n.
Max Zoom In Max Zoom Out
o.
Enter
p.
PTZ Control On / Off:
When the PTZ control mode is turned on, users could select the PTZ
device and press “OK” button to enter the PTZ control AP screen. (Press
“ESC” to exit from the PTZ control AP screen and return to the DVR
control AP screen)
q.
Menu / Up / Down / Left / Right
r.
Turbo:
To speed up menu selection or the control of the PTZ camera under the
software AP, users could activate "Turbo" function by clicking this button.
Users are allowed to change the turbo steps from 1 to 10.
Ex: If users activate the TURBO function and set the value of the turbo
step as 3, then when users press one of the button up/down/left/right, one
mouse click will function as clicking 3 times.
34
q.
p.
o.
r.
r.
l.
l.
m.
m.
n.
n.
j.
k.