Upgrading from output server 1 to output server 2 – Grass Valley iTX Output Server 2 v.2.5 User Manual
Page 11
7
iTX Output Server 2
Launch Guide
Upgrading from Output Server 1 to Output Server 2
iTX allows broadcasters to transition from an Output Server 1 system to an Output Server 2
system by running both video engines in parallel within the same iTX system during the
upgrade. This is known as a “mixed Output Server system” and is only recommended
during the upgrade and testing process, and not for day-to-day operation.
Transitioning to Output Server 2
3
Launch Server Controller on each playout
server.
4
Output Server 2 Setup:
• Define your channel setup, including
resolution, frame rate and reference input,
ancillary data and channel delay.
• Configure Nielsen watermark (if applicable)
• Configure Dolby metadata and audio output
• Configure subtitles (minimum required setup)
• Configure SCTE104
Step Description
See section(s)