Grass Valley iTX Output Server 2 v.2.5 - Manual (Page 17)

13
iTX Output Server 2
Launch Guide
Confirming your current version
You can confirm which version of Output Server and TX Play you are running from the iTX
AboutBox, which can usually be found on the Windows desktop of your playout server:
Starting Output Server 2
As iTX services, Output Server 2, TXPlay 2 and Media Cache 2 are controlled by the Server
Controller module, which is installed with any iTX component. When the Server Controller
is started, all of the services installed on the playout server are started, one after another. If
a service is shut down, Server Controller can restart them automatically to protect system
integrity.
Through Server Controller, Output Server 2 can be configured to control the way it starts,
the channels it runs and the way those channels are setup.
To start Server Controller:
• Go to Start > All Programs > iTX 2.0 > Server Controller.
The Server Controller appears and loads all of the installed services in their current
configuration.